Camcorder User Manual

Presenting Your Photos
14-12
You can use the camera’s slide show feature to play your
images and sounds automatically, or play them one at a
time using the navigation buttons. You can use all of the
camera’s other playback features to show your
presentation.
NOTE
If you are powering your camera with batteries, the LCD
screen is blank when the camera is connected to a video
device. The LCD screen remains lit if you use the camera
with the optional AC adapter.
6
When you’re done playing back pictures, turn your
camera off and turn off the TV (and VCR) or video
projector. Then disconnect the cables.
TIP
You can videotape your pictures, sounds, and videos to share
them without using a computer. After you connect the camera to
a VCR, press the Record button on the VCR and play back a video
clip (see page 6-9) or use the camera’s slide show feature (see
page 6-12).
Setting the Broadcast Signal System
If you will be using your camera with a television, you can
make sure the camera has the correct broadcast signal setting.
Follow these steps:
1
Turn the camera dial to to display the SETUP
menu.
2
Press the button under the icon to go to the
Language/Signal setup menu.
3
If necessary, press the button next to
TV
to change the
setting to
NTSC
(the U.S. broadcasting standard).
4
Press the button under
BACK
to save the setting and
return to the SETUP menu.
Capella.book Page 12 Thursday, April 20, 2000 4:21 PM