Camcorder User Manual

Setting Up Your Camera
1-4
Installing Batteries
Before you install (or remove) batteries, make sure the
camera is turned off.
1
Hold the camera upside down.
2
Press and hold down the battery cover lock and slide the
cover out to open it.
3
Insert four batteries into the compartment, positioning
the + and − ends as shown below.
4
Lower the battery cover and slide it in, as shown below.
When the battery power is almost out, a low battery icon
appears on the camera’s display panel. Be sure to remove
and recharge all four batteries at the same time.
battery cover
lock
Capella.book Page 4 Thursday, April 20, 2000 4:21 PM