Camcorder User Manual

Setting Up Your Camera
1-7
4
After securing the fastener, turn it so that the screw
sleeve is covered by the strap, as shown below.
5
Repeat steps 1 through 4 to attach the other end of the
strap to the other side of the camera.
Attaching the Lens Cap
Follow these steps to secure the lens cap to the camera:
1
Pass the end of the string with the shorter loop through
the eyelet on the edge of the lens cap.
2
Then, pass the end of the string with the longer loop
through the shorter loop.
3
Pull the end of the string with the longer loop tight.
Capella.book Page 7 Thursday, April 20, 2000 4:21 PM