Camcorder User Manual

Setting Up Your Camera
1-10
Setting the Date and Time
Before you use the camera, you need to set its clock. Then
the camera will automatically record the date and time for
each picture you take. If you remove the batteries for more
than one hour (without connecting the camera to an
optional AC adapter), you will need to reset the clock.
NOTE
You can also set the camera’s clock through your computer. See
Chapter 9 for instructions on connecting the camera to your
computer, and Chapter 13 for instructions on setting the date and
time.
Follow these steps to set the date and time:
1
Turn the camera dial to . Press the
POWER
button
to turn on the camera.
2
You see the clock setting screen with the month
highlighted in red.
3
Press the button next to the up or down arrows to
increase or decrease the number, until the month is
correct.
4
Press the button below the right arrow to select the day,
year, and time (military time format). Make adjustments
as described in the previous step.
camera dial
Capella.book Page 10 Thursday, April 20, 2000 4:21 PM