Camcorder User Manual

Taking Pictures
2-8
The photo capture light stops flashing and you see a
green circle
on the screen when the lens locks in
focus and the camera locks its exposure settings. While
holding the shutter button down, you can reframe your
picture if you want.
6
Press the shutter button the rest of the way down to take
the picture.
7
Hold the camera still until the shutter snaps. Then
release the shutter button.
NOTE
If there is a delay after you press the shutter button, make
sure you hold the camera still until the shutter snaps, to
avoid blurring your images.
If the Confirmation setting is on, you see a confirmation
screen.
NOTE
You enable the confirmation screen in the Shot SETUP
menu. See page 2-16 for detailed instructions on using the
confirmation screen.
From the confirmation screen, you can do the following:
◗ Press the button next to Delete if you don’t want
the picture.
◗ Press the button next to
Rec Sound
to record a
message. You see a countdown on the screen.
During this time, you can record a message into the
camera’s microphone.
Capella.book Page 8 Thursday, April 20, 2000 4:21 PM