Camcorder User Manual

Taking Pictures
2-14
3
Press the timer button on the top of the camera. The
timer icon appears in the status display panel.
4
Press the shutter button all the way down. The timer
icon and the red timer light on the front of the camera
flash slowly for eight seconds. Then they flash rapidly for
two seconds before the shutter is released.
The camera clicks when the image is captured. The
photo capture light on the back of the camera flashes
green as the PhotoPC 3000Z processes the image(s).
NOTE
To cancel a timer picture after you’ve pressed the shutter
button, press the shutter button again, or press the
timer button.
Selecting Color or Black and White
Mode
You use the SETUP menu to switch between color and black
and white pictures.
NOTE
There is no difference between the file sizes of color and black
and white pictures.
Follow these steps:
1
Turn the camera dial to . You see the SETUP
menu.
2
Press the button next to
Monochrome
or
Color
to
change to your desired setting.
timer button
color/
monochrome
setting
Capella.book Page 14 Thursday, April 20, 2000 4:21 PM