Camcorder User Manual

Framing, Focusing, and Zooming

4-2

Follow these steps to take digital zoom pictures:

Turn the camera dial to

. You see the View menu.

NOTE

This example shows the View menu when the user mode is

set to Program. Depending on the user mode setting, your

View menu may look different.

For Program or Full Auto mode, press the button next

to ×

××

. For Manual mode, press the button under

Change

, then press the button next to ×

××

The words

DIGITAL ZOOM

appear on your LCD

briefly. A yellow frame appears around the previewed

image, and the setting changes to ×

××

Press the shutter button halfway to lock the auto focus

and exposure. When the camera locks its settings, the

photo capture light stops flashing and you see a green

circle

and flash and exposure settings on the screen. If

you want, you can reframe your picture while holding

the button down.

Press the button all the way down to capture the image.

The digital zoom format remains active until you change it

or turn off the camera.

Capella.book Page 2 Thursday, April 20, 2000 4:21 PM