Camcorder User Manual

Framing, Focusing, and Zooming
4-5
NOTE
This View menu illustrates what you see if your user mode is
set to Program. Your View menu will look different if the
user mode is set to Full Auto or Manual.
2
Press the button next to the frame setting until you see
the (macro) setting.
A green frame appears around the preview image and for
a few seconds, the word
MACRO
appears on the LCD
screen.
3
Press the shutter button halfway to lock the auto focus
and exposure. When the camera locks its settings, the
photo capture light stops flashing and you see a green
circle
on the screen. If you want, you can reframe
your picture while holding the button down.
4
Press the button all the way down to capture the image.
Macro mode remains active until you change it or turn off
the camera.
Adjusting the Focus
The PhotoPC 3000Z lets you manually select a fixed focus.
Follow these steps:
1
Make sure that the camera is set to Manual user mode.
(See page 1-9 for details.)
2
Turn the camera dial to .
3
If you want to use the macro feature or take panoramas,
press the button next to the frame setting until
(macro) or (panorama) appears.
Capella.book Page 5 Thursday, April 20, 2000 4:21 PM