Camcorder User Manual

Framing, Focusing, and Zooming
4-6
4
Press the button under
Menu Change
until the
following screen appears:
5
Press the buttons next to the up and down arrows to
select a manual focus setting.
If the camera is set to
Normal Frame
or , you can
choose from the following settings:
AF
The camera determines the focus automatically.
Focal point is about three feet.
Focal point is about 10 feet.
Focus is infinity.
If you’re using the macro mode, you can choose
either
M1
(focal point is about 8 inches) or
M2
(focal
point is about 20 inches).
6
Press the shutter button halfway to lock the camera’s
exposure settings. When the camera locks its settings,
the photo capture light stops flashing and you see a
green circle on the screen. You also see the shutter
speed and aperture setting at the top of the screen in
yellow. If you want, you can reframe your picture while
holding the button down.
7
Press the button all the way down to capture the image.
Your manual focus setting remains active until you change it
or change your user mode.
focus setting
Capella.book Page 6 Thursday, April 20, 2000 4:21 PM