Camcorder User Manual

Adjusting Exposure and Color Settings
5-6
Follow these steps to adjust the sensitivity setting:
1
Make sure the camera is set to Program or Manual user
mode. (See page 1-9 for instructions.)
2
Turn the camera dial to or .
If you are taking pictures using the viewfinder (with the
camera dial set to ), press the
MENU
button.
If you are taking pictures with the LCD screen, you see
the View menu.
3
Do one of the following:
◗ If the user mode is set to Program, press the button
under
ISO
to change the sensitivity setting.
◗ If the user mode is set to Manual, press the button
under
Menu Change
. You see the following
screen. Press the button under
ISO
to change the
sensitivity setting.
Adjusting the White Balance Setting
The PhotoPC 3000Z adjusts white balance automatically to
ensure color accuracy. However, you may want to change
this setting for special effects or lighting conditions.
You can select the following white balance settings:
AUTO
Adjusts the white balance of your pictures
automatically. This is the recommended setting for
most pictures.
LCD Screen
Viewfinder
LCD Screen
Viewfinder
Capella.book Page 6 Thursday, April 20, 2000 4:21 PM