Camcorder User Manual

Adjusting Exposure and Color Settings
5-11
Capturing Shots With Fixed Settings
After you have enabled fixed settings as described in the
section above, follow these steps:
1
Turn the camera dial to .
2
Press the button next to the exposure setting to change
the exposure mode to
Fixed Settings
.
3
Center your subject on the screen,
then press the shutter button halfway
down to lock the auto focus and
exposure.
You see a green circle
on the screen when the camera
locks the settings.
4
Press the shutter button the rest of the
way down to take the picture.
NOTE
For detailed instructions on taking pictures, see Chapter 2.
Your camera processes the picture and saves its settings.
Then you see a settings confirmation screen:
5
Press the button next to
Yes
to save the settings, or press
the button next to
No
if you don’t want to save them
(repeat the steps above to fix new settings). You return
to the View screen.
After you save the settings, you can do the following
before taking more pictures:
◗ Press the button under
FixSet Info
to see the
settings you have saved. (Press the button under
BACK
to return to the View screen.)
Capella.book Page 11 Thursday, April 20, 2000 4:21 PM