Camcorder User Manual

Adjusting Camera Settings
7-2
Follow these steps to change the power off interval:
1
Turn the dial to . You see the SETUP menu:
2
Press the button below
Camera SETUP
to go to the
Camera SETUP menu. The current power off setting
appears in the upper right corner of the screen.
3
Press the button next to the current setting to select a
new setting.
Turning the Camera Alert Sounds On
or Off
Normally, the camera clicks to let you know when an image
has been captured and beeps whenever you press any of its
buttons. However, you can turn some or all of the alert
sounds off. Follow these steps:
1
Turn the camera dial to to display the SETUP
menu. Then press the button under
Camera SETUP
.
You see the Camera SETUP menu (shown to the left).
2
Press the button under
Beep
to cycle through these
choices:
◗
Shutter
The camera clicks when an image is
captured.
◗
Never
Turns all sounds off.
◗
Always
The camera beeps whenever you press
a button and clicks when the camera
captures images.
power off
setting
Capella.book Page 2 Thursday, April 20, 2000 4:21 PM