Camcorder User Manual

Adjusting Camera Settings
7-4
Setting the Time and Date
The camera remembers the time and date settings you made
when you formatted your memory card, unless it goes
without battery power for more than an hour.
If you need to reset the time and date for any reason, follow
these steps:
1
Turn the camera dial to to display the SETUP
menu.
You see the camera’s date and time settings in the upper
right corner of the screen.
2
Press the button next to the time and date to display the
following screen. The month is highlighted in red.
3
Press the buttons next to the up and down arrows to
adjust the setting, then press the button under the right
arrow to highlight the day.
4
Repeat step 3 for each item you want to change. (To
return to a previous setting, press the button under the
left arrow.)
5
When you’re done, press the button under
BACK
to
save the settings and return to the SETUP menu.
camera
date and
time setting
Capella.book Page 4 Thursday, April 20, 2000 4:21 PM