User's Guide Personal Computer 3865X Plus

Configuring AutoCAD
The first time you use AutoCAD with the driver, you need to
configure AutoCAD for an ADI display. Follow the steps below:
1.
2.
3.
4.
Select Configure AutoCAD from the AutoCAD
main menu.
When the program displays the current configuration (if
any), select Configure video display.
Select ADI as your new driver. (The menu indicates that
this is installed at interrupt 7A hex.)
Save the new configuration and return to the main menu.
Configuring AutoShade
If you have AutoShade, the first time you use it with the driver,
you need to configure AutoShade for an ADI display. Follow
the steps below:
1. Before you run the AutoShade program, remove the file
SHADE.CFG from the AutoCAD directory on your hard
disk. (You can use the DEL or ERASE command; see your
MS-DOS Reference Manual.)
2. Start AutoShade.
3. The program asks for a display and rendering driver. Select
ADI for both drivers and indicate that you have a dual
display system.
4. When you exit from the AutoShade program, it creates a
new SHADE.CFG file.
Using the VGA Utilities
A-13