User's Guide Personal Computer 3865X Plus

The screen displays the message below:

Insert diskette for drive B: and

press any key when ready

Remove the Utility 1 diskette, insert the formatted diskette,

and press any key. The screen displays the message below:

Insert diskette for drive A: and

press any key when ready

10. Continue inserting the Utility 1 diskette when the

computer prompts you for the diskette for drive A and

inserting

the formatted diskette when the computer

prompts you to insert the diskette for drive B. When all the

.SYS files are copied, the system displays the MS-DOS

prompt.

11. Now reinstall GEM 2.2. Insert the GEM 2.2 System Master

Disk in drive A, type the following, and press Enter:

SCRNSTAL C:

12. Follow the instructions in your GEM documentation and

on the screen to finish the installation. You may need to

insert the original GEM device driver disk as well as the

GEM_DRIVRPK diskette you created.

Note

If you have installed GEM 2.2 and you want to change to the

other display driver, have the GEM_DRIVRPK diskette

ready, and then start from Step 11 to change the

driver.

Using the VGA Utilities

A-19