User's Guide Personal Computer 3865X Plus

3. Create a temporary directory called VENTEMP on your

hard disk. At the MS-DOS prompt, type the following and

press

Enter:

MD VENTEMP

To copy all the files from the VEN1 directory on your

Utility 1 diskette into the VENTEMP directory on your

hard disk, type the following and press Enter:

COPY A:\VEN1\*.* C:\VENTEMP\*.*

Remove the Utility 1 diskette.

Use the Epson MENU utility or the MS-DOS FORMAT

command to format a blank diskette. (See your MS-DOS

Reference Manual for instructions.)

Insert the blank, formatted diskette and log onto the

VENTEMP directory. Then type the following and press

Enter:

COPY *.* A:

Log onto drive A.

If you are using Ventura Publisher, version 1.0, type the

following and press

Enter:

VPDRIVER

If you are using Ventura Publisher, version 1.1, type the

following and press

Enter:

VPDRVl 1

10. Select either VGA (640 x 480) or VGA (800 x 600) and

continue the installation procedure according to the

instructions on the screen.

A-24 Using the VGA Utilities