User's Guide Personal Computer 3865X Plus

Installing the Utility

The SETVGA utility is in the UTILS directory on the Utility 1

diskette. To install the utility, follow these steps:

If you do not already have a directory for utility programs,

create a directory on your hard disk for SETVGA. (See your

MS-DOS Reference Manual for information on creating

directories.)

Insert the Utility 1 diskette in drive A and copy the

program from the Utility 1 diskette to your utilities

directory.

For example, if you created a directory called SET, you

would type the following and press Enter to copy the

program:

COPY A:\UTILS\SETVGA.EXE C:\SET\

Adding SETVGA to the AUTOEXEC.BAT file

For convenience in accessing SETVGA, include a pathname in

your AUTOEXEC.BAT file. Follow these steps:

At the MS-DOS command prompt in the root directory,

type the following and press Enter:

COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT

To set the path for the SETVGA utility, type the following

and press

Enter:

PATH C:\pathname\

Using the VGA Utilities

A-41