User's Guide Personal Computer 3865X Plus

Make sure the cable connector fits properly onto the drive

interface and then push the connector onto the interface.

Caution

If you do not correctly align the connector, you could

severely damage your diskette drive when you push

in.

If you removed a hard disk drive from the vertical mounting

position, go to step 6. If you did not, go to step 8 for

instructions on connecting the power cable.

Locate the hard disk drive ribbon cable that you removed

from the drive in the vertical mounting position. Follow the

instructions below to connect the middle connector on this

cable to the vertically mounted drive.

As shown in the illustration below, there are two rows of

holes in the middle connector. One of the holes is blocked

with a plastic plug.

‘blocked hole

B-38 Installing and Removing Disk Drives