Personal Computer User Manual

Main system board jumper settings
Jumper Jumper Function
number setting
J1
1-2 Math coprocessor installed
J1
2-3* No math coprocessor installed
J2
1-2 Password skip enabled
J2
2-3* Password skip disabled
J3
1-2 Disables the built-in hard disk drive controller
so you can use a hard disk drive controller on
an option card in your computer
J3
2-3* Enables the built-in hard disk drive controller
J4
1-2* Sets the P-ROM type to 256 Kbits
J4
2-3 Sets the P-ROM type to 512 Kbits
J5 1-2
Disables the built-in mouse connector so you
can use a mouse or other pointing device
connected to a port on an option card in your
computer; the device must use the IRQ 12
signal
J5
2-3*
Enables the built-in mouse connector for use
with a mouse which uses the IRQ 12 signal
* Factory setting
SIMM card jumper settings
Jumper Jumper Function
number setting
J1 1-2
SlMMs have been installed for additional
memory
J1 2-3*
No SlMMs have been installed
* Factory setting
Installing Options
5-15