Personal Computer User Manual

2. Insert the working copy of your Reference diskette into
drive A.
3. If necessary, type A: and press Enter to log onto drive A.
4. At the A> prompt, type CORFIX and press Enter. The
following messages appear:
This program will configure the
system to work with the SMART
utility when installing the
RampagePlus 286.
SMART can only be executed
immediately after this
configuration program.
Continue ? (Y/N)
--
5. To configure your computer for use with RampagePlus 286,
press Y. (If you want to exit to MS-DOS without
configuring your computer, press N.) If you press Y, you see
the MS-DOS A> prompt and this message:
Configuration completed. The SMART
installation utility may now be
used.
6. Use the SMART setup program now. See your
RampagePlus 286 manual for instructions.
You can also execute CORFIX from your hard disk if you
copied the CORFIX utility from the Reference diskette to
your hard disk.
5-24
Installing Options