Personal Computer User Manual

Some errors, such as Time
i s invalid, do not allow
you to set a default value, so the screen does not display the
Set default value prompt. If you see one of these
errors, press ESC; the screen displays the main Setup menu
so you can enter a new setting.
Note
If you see the message Real-time clock has
lost power, contact your Epson dealer. You cannot
correct this error using the Setup program.
2. Be sure Y is highlighted and press Enter. The Setup
program changes the setting that caused the error to a
setting that is more likely to match your system
configuration. The screen displays the main Setup menu:
Exit
Display
Password
Fast boot
Auto speed
Real-time clock
Hard disk drive
Diskette
drive
Serial / Parallel
You should check all the settings in the Setup program to
make sure they are correct for your system. The default
value for the setting that caused the error may not be the
correct one for your particular configuration.
Running the Setup Program
2-5