Personal Computer User Manual

Moving the Cursor Block
Use 4 and ? to move the cursor block (the highlighted bar)
through the options on the main Setup menu. After you
highlight the option you want, you can press Enter to select it.
NoteNote
If the arrow keys on the numeric keypad do not appear to
work, Num Lock mode may be enabled. If the Num Lock
indicator in the upper right corner of the keyboard is lit, press
the Num Lock key once to disable Num Lock mode. and
enable the arrow keys on the numeric keypad. If you need to
enter numbers while using the Setup program and you want
to use the numeric keypad, you need to turn on Num Lock.
Follow the instructions in the rest of this chapter to use the
Setup program to define your computer’s configuration.
Setting the Display Adapter Card Type
Follow the steps below to set the type of display adapter (video)
card you are using with your Equity 386SX.
Note
With this option you select the type of display adapter card
you are using-not the type of monitor.
2-6
Running the Setup Program