Personal Computer User Manual

At the main Setup menu, highlight

Display.

You

see

the current display adapter card type, such as the following:

Monochrome 80 column

If the display adapter card type is correct for your system,

you can skip this section.

To change the display adapter card setting, press Enter. The

cursor block moves into the submenu and you see:

CGA

40 column

CGA

80 column

Monochrome 80 column

Special Adapter

The last option in this menu displays the type of display

adapter card you installed if it is an EGA, VGA, or MCGA

card. If you installed a different type of display adapter card

or a type listed as one of the first three options, you see

Special Adapter as the fourth option.

Press Enter to move the cursor block into this submenu and

then use

to highlight the option that matches your

display adapter card. If you are not sure which one to

choose, follow these guidelines:

If you have a VGA, EGA, or MCGA card, select the

fourth option.

If you have a color graphics adapter (CGA) or a multi-

graphics adapter (MGA) attached to an RGB (color)

monitor, select CGA 80 column. (Also be sure to

set the color/mono switch on the MGA card to color.)

Running the Setup Program

2-7