Personal Computer User Manual

2. To change the setting from disabled to enabled
or vice versa, press Enter.
3. Highlight * * SAVE SETTING ** and press Enter to
return to the main Setup menu.
Setting the Real-time Clock
The real-time clock in your Equity 386SX constantly tracks the
time and date-even when the computer is turned off. The first
time you run the Setup program, you use the Real-time
clock option to set the time and date for your computer. You
may need to use this option again later to adjust the time for
daylight savings time. The computer automatically changes the
date for leap years.
Another way to change the real-time clock*s time and date is
with the MS-DOS TIME and DATE commands. See your
MS-DOS Reference Manual for instructions.
Follow these steps to set the real-time clock:
1. At the main Setup menu, highlight Real-time
clock. If the time and date have been previously set, the
current settings appear:
If the time and date are correct, you can skip ‘the rest of this
section.
2-14 Running the Setup Program