Personal Computer User Manual

If the time and date are incorrect, go to step 2 below.

If the time and date have never been set, the submenu

contains a template for you to fill in:

Go to step 2 to enter the time and date.

Press Enter to move the cursor block into the submenu.

3. To set or change the time, press Enter again. You see this

prompt:

4. Using a 24-hour time period, enter the time in the exact

format shown in the box. Type two digits for each part; the

Setup program automatically inserts the colons ( : ). For

example, to set the time to 1:30 p.m., you would type the

following:

133000

You can use the backspace key to make corrections.

Note

If you want to use the number keys on the numeric

keypad to enter the time or date, press the Num Lock

key to enable Num Lock mode. The Num Lock light is

on when Num Lock mode is enabled.

Running the Setup Program

2-15