Personal Computer User Manual

If you want to change the drive types, and the configuration

of the hard disk you are installing does not match one of the

drive types listed in Appendix E, go to step 7.

If you have disconnected the drive or if the drive does not

exist, highlight None and press Enter. All the drive

settings become 0. Go to step 8.

Note

If you install an ESDI hard

disk drive controller in an

option slot (instead of using the embedded controller),

follow these guidelines to set the drive type:

D If the

ESDI

controller does not have its own BIOS

ROM

and your hard disk drive type is not listed on

the hard disk drive parameter table, go to step 7.

If the hard disk drive type is listed on the hard disk

drive parameter table, go to step 6 and set the type.

If the ESDI controller has its own BIOS ROM, you

must set the hard disk drive type to Type 1. Go to

step 6.

Highlight Type and press Enter. The current type

number appears:

Now select the drive type number that matches your hard

disk configuration from the list of hard disk drive types in

Appendix E.

Running the Setup

Program

2-19