Personal Computer User Manual

8. If you want to change the hard disk settings for drive 2,
press -+ and return to step 4.
9. When the hard disk drive settings are correct, press ? to
move the cursor block into the top submenu. Highlight
** SAVE SETTINGS
* * and press Enter to save your
hard disk drive configuration. The main Setup menu
appears.
Setting the Diskette Drive Type(s)
Your Equity 386SX
comes with one factory-installed diskette
drive. If you removed the installed drive or added a second
diskette drive, you need to change the diskette drive settings to
match your configuration. If you haven’t made any changes, you
can verify the drive type settings. Follow these steps:
1. At the main Setup menu, highlight Diskette drive.
The current settings appear:
Each diskette drive is followed by its specific type (360KB,
720KB, 1.2MB, or 1.44MB). If the diskette drive types on
the screen match your diskette drive configuration, you can
skip the rest of this section.
2-22 Running the Setup Program