User guide

Note
If you are going to install NetWare
®
286, version 2.2, and you
plan to assign a user-defined drive type for your drive, you
must install the NetWare IDE drivers (IDE.DSK and
IDE.OBJ). You can obtain these drivers by downloading
IDE286.ZIP from Netwire in CompuServe.
®
Alternatively,
you can select one of the predefined hard disk drive types
that most closely matches the drive you are installing.
The Advanced System Setup Option
When you select this option from the Main Menu, you see the
Advanced System Setup screen. From this screen, you can
select the options that allow you to configure the computer’s
cache memory and shadow memory, and define options that
control the advanced chipset.
Note
The Advanced System Setup options can be automatically
configured by system. to avoid malfunctions, let the
system configure these options.
Configuring Cache Memory
You use the Memory Cache option to enable or disable
automatic configuration of your external cache memory.
Enabling cache memory improves system performance,
especially in large data retrieval and processing environments.
If you choose to configure your cache memory (rather than let
the system automatically configure it), you can define the burst
wait states and two non-cacheable areas of memory. However,
it’s a good idea to let the system automatically configure your
cache memory.
2-6 Running the SETUP Program