User Manual

EPSON Stylus Color 440/640/740 Revision A
Chapter 5 Adjustment 147
6.
When you input the head ID value, the screen automatically
advances consequently, as shown below:
Figure 5-24. Head Voltage ID Writing Screen
7.
Press the Esc key once. The screen returns to the Head Voltage ID
Check/Input Select Menu. (See Figure 5-22.)
8.
By using the Up/Down arrow key, select
Check present data
on the
screen. The screen below appears.
Figure 5-25. Input ID Confirmation Menu
M S-D O S Prom pt-S C 640
Auto
W riting to EEPROM now.
M S-D O S Prom pt-S C 640
Auto
Esc: Previous
This process takes about
5 seconds.
Note:
The inform ation provided in this service tool is com m on for the Stylus Color 440, 640,
and 740 except for som e printer specific inform ation such as ink counter lim its.
Note:
The inform ation provided in this service tool is com m on for the Stylus Color 440, 640,
and 740 except for som e printer specific inform ation such as ink counter lim its.
18218 has been written in EEPROM as the
HEAD ACTUATOR VOLTAGE ID.
M S-D O S Prom pt-SC 640
Auto
R eading the present head voltage value.
HEAD VOLTAGE ID = 18218
Esc: Previous
N o te :
The inform ation provided in this service tool is com m on for the Stylus C olor 440, 640,
a n d 7 4 0 e x c e p t fo r s o m e p rin te r s p e c ific in fo rm a tio n s u c h a s in k c o u n te r lim its .