User Manual

EPSON Stylus Color 440/640/740 Revision A
Chapter 5 Adjustment 150
7.
After changing the position of the adjust lever, select Head angular
adjustment pattern again. The printer prints out a head angular
adjustment pattern and the screen automatically returns to the
Current Head Angular Confirmation Menu (1) shown in the figure
below.
Figure 5-31. Current Head Angular Confirmation Menu (1)
8.
Verify the pattern on the printout again.
9.
Repeat the procedures from Step 5 to Step9 until the combination
pattern of black/magenta is correct.
10.
After completing the adjustment, tighten the loosened screw, and
reinstall the upper case only when you remove it.
M S-D O S Prom pt-SC 640
Auto
H ead Angular A djustm ent
E sc: P revious
H ead Angular A djustm ent pattern
E n te r: O K
N o te :
The inform ation provided in this service tool is com m on for the Stylus Color 440, 640,
and 740 except for som e printer specific inform ation such as ink counter lim its.
M ove the carriage to the head angular adjustm ent position.
R eturn the carriage to the hom e position.