User's Manual Printer ActionPrinter 4500
Table Of Contents
- FRONT MATTER
- PRODUCT UPDATE NOTICE
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- GLOSSARY
- INDEX
- QUICK REFERENCE

User-defined Characters
If you define characters in one mode, then switch to another mode and
select the user-defined character set, the command is ignored and
nothing is printed. The user-defined character definitions, however,
remain unaffected. If you switch back to the mode in which they were
defined, you can then select and print them.
Keep in mind that user-defined characters are stored in RAM, which is
not permanent memory. When the printer power is turned off or the
printer is initialized with the INIT signal, the user-defined characters are
lost. (Some computers do this each time BASIC is loaded.)
Software and Graphics
4-31