User's Manual Printer ActionPrinter 4500
Table Of Contents
- FRONT MATTER
- PRODUCT UPDATE NOTICE
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- GLOSSARY
- INDEX
- QUICK REFERENCE
The Pull Tractor
Although the pull tractor can be used in combination with the built-in
push tractor as described above, the pull tractor can also be used by
itself. Instead of setting the paper on the pins of the push tractor,
simply insert it through the same paper path as you would use with
single-sheet paper.
CAUTION: Do not use the short tear-off feature with the pull
tractor. Before you start printing with the pull tractor, be sure
the DIP switch 2-2 is set to off.
Removing the Pull Tractor
1. Make sure to tear off the printed document and remove the tractor
cover and paper guide. Then turn on the printer.
5-30
Using the Printer Options