User`s guide
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
118 The Control Panel
When using cut sheet paper, enter the number of cut sheets set in the printer
and the alert value.
Note:
This setting is available only when you select Roll Paper or Cut Sheet as the
PAPER COUNTER setting in Maintenance mode.
PLATEN GAP
You can adjust the distance between the print head and paper. Normally,
leave this set to STANDARD for standard paper. If you find that printed images
are smeared, select WIDE or WIDER. Select NARROW for printing on thin paper, or
WIDEST for printing on thick paper.
Note:
This setting will return to STANDARD after you turn the printer off and on.
PAGE LINE
You can select whether to print the page line (the line that shows where to cut)
on roll paper. Select ON if you want to print the page line, or OFF otherwise.
When you have selected ON, the page line feature functions differently
depending on the paper source setting, as described below.
Note:
When Sheet is selected as the paper source, this setting is not available.
INTERFACE
You can select an interface to receive your print data. When you select AUTO,
the printer automatically switches between interfaces, depending on which
one is receiving data first. When you select USB or NETWORK, only the selected
interface receives your print data. If no more print job is received, the printer
returns to an idle state after 10 seconds or more.
Paper source setting Printer’s function
Roll Auto Cut On Prints a page line on the right side only, and
cuts paper automatically after the print job.
Roll Auto Cut Off Prints page lines on the right side and below
the data, but does not cut paper
automatically after the print job.