User`s guide
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
The Control Panel 129
NETWORK SETUP
This menu contains the following items. For detailed information about
network settings, see the Network Guide.
NETWORK SETUP
You can configure the network setting of the printer. The following items
appear only when NETWORK SETUP is set to ENABLE.
GET IPADDRESS
You can select the method used to set the IP address of the printer. When
AUTO is selected, the IP, SM, and GW settings are not displayed. Select PANEL to
set these addresses using the printer’s control panel.
Choose PANEL when setting the IP address, subnet mask, and default
gateway using the printer's control panel.
Choose AUTO when getting the IP address from a DHCP server. The IP
address is automatically obtained from the DHCP server whenever the printer
is reset or turned on.
IP
You can set the IP address of the printer.
SM
You can set the Subnet Mask of the printer.
GW
You can set the Default Gateway of the printer.
BONJOUR
You can set the Bonjour settings of the printer.
INIT NETWORK
You can return the network settings of the printer to the factory default value.