User`s guide
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
The Control Panel 135
Paper thickness test pattern example:
9. Examine the printed pattern to determine which set of lines are most
closely aligned (showing the smallest gap), and note the corresponding
number.
10.After the pattern is printed, THICKNESS NUM appears. Press or to
select the number noted in step 9, then press Menu to save the
selected value.
11. Press , then press . You see CUT METHOD in the lower row of the LCD.
12.Press Menu, press or to select STANDARD, THICK, SLOW,
THICK, FAST, or THIN PAPER, then press Menu again to save the
selected value.
13. Press , then press . You see PPR FEED ADJ in the lower row of the
LCD.
14.Press Menu, press or to set the paper feed amount, then press
Menu again to save the selected value.
15. Press , then press . You see EJECT ROLLER in the lower row of the
LCD.
16.Press Menu, press or to select AUTO, SHEET, ROLL CURLED, or
ROLL NORMAL, then press Menu again to save the selected value.
17.Press , then press . You see DRYING TIME in the lower row of the LCD.
18.Press Menu, press or to select the time in seconds, then press
Menu again to save the selected value.
19. Press , then press . You see SUCTION in the lower row of the LCD.
20.Press Menu, press or to select STANDARD, -1, -2, -3, or -4, then
press Menu again to save the selected value.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16