User`s guide
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
Maintenance and Transportation 175
9. When INSTALL CNVRSION CRTG appears on the LCD, insert three
conversion cartridges in the slots on the left ink compartment.
Note:
If REPLACE CNVRSION CRTG appears on the LCD, press the pause button.
Remove the old conversion cartridge(s) from the left ink compartment, and then
insert the new conversion cartridge(s). Go to step 4 to start again.
10.When LOWER THE LEFT INK LEVER appears on the LCD, lower the ink
lever on the left ink compartment.
The printer starts draining ink, and DRAINING XX% appears on the LCD.
Wait until draining is complete.
11.When draining is complete, RAISE THE LEFT INK LEVER appears on the
LCD. Raise the ink lever on the left ink compartment.