Photo Printer User Manual
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
The Control Panel 127
EJECT ROLLER
You can select AUTO, SHEET, ROLL CURLED, or ROLL NORMAL.
DRYING TIME
You can set the ink drying time between each print head pass. The range is
from 0 to 10 seconds.
SUCTION
You can set the suction pressure used to feed the paper. Select STANDARD, -1,
-2, -3, or -4.
M/W ADJ
You can adjust the MicroWeave mode. The settings are STANDARD, 1 and 2.
Increase the value to give priority to print speed, or decrease it to give priority
to print quality.
AUTO The printer selects the most appropriate setting
automatically. When you use Epson media, usually
select this setting.
SHEET If you want to print on cut sheet paper that is not Epson
media, select this setting.
ROLL CURLED If you want to print on strongly curled roll paper that is
not Epson media, select this setting.
Note:
Make sure that the ink is dry enough on the paper
before the roller touches the media; otherwise, the ink
will soil the roller surface, which stamps on the prints.
ROLL NORMAL If you want to print on roll paper that is non-Epson
media, select this setting. When roll paper is selected
for the printer, this parameter is selected and no feed
roller is used. If you select this parameter while using cut
sheets, you need to eject the cut sheet paper one by
one.