Photo Printer User Manual
Table Of Contents
- Front Matter
- Contents
- Printing with Mac OS X
- Printing with Windows
- Basic Settings
- Selecting Settings on the Main Tab
- Selecting the Media Type setting
- Selecting the Color setting
- Selecting the Print Quality setting
- Selecting the Mode setting
- Selecting the Advanced settings
- Paper Configuration
- Saving settings
- Deleting settings
- Exporting and importing settings
- Selecting the Paper Source setting
- Selecting the Borderless setting
- Selecting the Paper Size setting
- Selecting the Printable Area setting
- Selecting the Roll Paper Option settings
- Selecting the Save Roll Paper setting
- Checking Ink Levels
- Previewing your printout
- Using the Manual function
- Selecting Settings on the Page Layout Tab
- Using the Printer Utilities
- Getting Information Through On-screen Help
- Checking Printer Status and Managing Print Jobs
- Increasing the Print Speed
- Sharing Your Printer
- Updating and Uninstalling the Printer Software
- The Control Panel
- Paper Handling
- Maintenance and Transportation
- Problem Solver
- Troubleshooting
- Printer stops printing unexpectedly
- The printer does not turn on or stay on
- The printer prints nothing
- Printouts are not what you expected
- Print quality could be better
- Color documents print in black ink only
- Printing could be faster
- Roll paper cannot be cut
- Paper feed or paper jam problems occur frequently
- Roll paper does not eject properly
- Clearing paper jams
- Managing Color with Profiles
- Paper Information
- Where To Get Help
- Troubleshooting
- Product Information
- Options and Consumable Products
- Safety Instructions
- Index
Problem Solver 193
WRONG PAPER SIZE The loaded paper size
does not match the data
size.
Match the loaded paper
size to the data size.
PAPER OUT No paper is loaded in the
printer or is loaded
incorrectly.
Load paper correctly.
Roll paper has run out
during printing.
Load a new paper roll.
NO BORDERLESS
WITH THIS SIZE
RELOAD PAPER
Note: These
messages display
alternately on the
LCD.
A2 size cut sheet media
has been installed for
borderless printing.
Install a different size of
cut sheet media or roll
paper.
RELOAD PAPER The printer cannot
detect the loaded cut
sheet media, because it
is wavy or curled.
Flatten the cut sheet
media.
The printer cannot
detect the loaded
paper.
Move the paper lever.
NOT STRAIGHT
RELOAD
Cut sheet media is not
loaded straight, and
needs to be aligned.
Load the cut sheet
media correctly. See
"Loading cut sheet
media" on page 153.
PAPER NOT
STRAIGHT
The paper is not loaded
straight.
Load paper straight.
COMMAND ERROR
CHECK DRIVER
SETTINGS
Damaged data has
been sent to the printer.
Stop printing, and press
the pause button for 3
seconds.
The printer receives data
with a wrong command.
The installed printer driver
is not correct for the
printer.
Stop printing, and press
the pause button for 3
seconds. Then make sure
that the installed printer
driver is correct for the
printer.
REPLACE INK CRTG The ink cartridge is
expended.
Replace the expended
ink cartridge with a new
one. See "Replacing Ink
Cartridges" on page 169.
Message Description What to do