Owner's manual
Table Of Contents
- Front Matter
- Contents
- Welcome
- Chap 1-Setting Up the Projector
- Chap 2-Using the Projector
- Chap 3-Using the Remote Control
- Chap 4-Fine-tuning the Projector
- Chap 5-Maintaining and Transporting the Projector
- Chap 6-Solving Problems
- Appendix A: Connecting to Additional Equipment
- Appendix B: Notices
- Appendix C: Technical Specifications
- Index
52
Maintaining and Transporting the Projector
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
■
Use a canister of compressed air to remove dust.
■
To remove dirt or smears on the lens, use lens-cleaning paper. If
necessary, moisten a soft cloth with lens cleaner and gently wipe
the lens surface.
Cleaning the Projector Case
Before you clean the case, first turn off the projector and unplug the
power cord.
■
To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
■
To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent. Then wipe the case.
■
Do not use wax, alcohol, benzene, thinner, or other chemical
detergents. These can damage the case.
extend the lens and
remove the cap before
cleaning