600-811-820.
600-811-820.book Page ii Tuesday, April 30, 2002 10:17 AM Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself.
600-811-820.book Page iii Tuesday, April 30, 2002 10:17 AM C Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . . 2 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . . 3 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unpacking the Projector. . . . . . . . . .
600-811-820.book Page iv Tuesday, April 30, 2002 10:17 AM Controlling the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Switching Between Picture Sources . . . . . . . . . . . . . . . . 29 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Turning Off the Picture and Sound . . . . . . . . . . . . . . . 30 Shutting Down the Projector . . . . . . . . . . . . . . . . . . . . . . . . 30 iv 3 Using the Remote Control . . . . . . . . . . . . . . . . . . .
600-811-820.book Page v Tuesday, April 30, 2002 10:17 AM Customizing Projector Features . . . . . . . . . . . . . . . . . . . . . . 55 Setting Advanced Features . . . . . . . . . . . . . . . . . . . . . . . 57 Viewing Lamp Usage and Other Information. . . . . . . . . . . . 58 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . . . . 59 5 Maintaining and Transporting the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Cleaning the Lens . . . . . . . . . .
00-811-820.book Page vi Tuesday, April 30, 2002 10:17 AM Connecting to a High-End Workstation . . . . . . . . . . . . . . . 93 Connecting to a DVI Video Source . . . . . . . . . . . . . . . . . . . 93 B C Appendix B: Notices . . . . . . . . . . . . . . . . . . . . . . . . . 95 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 95 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . . 97 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . .
600-811-820.book Page 1 Tuesday, April 30, 2002 10:17 AM W - Welcome The EPSON ® PowerLite® 600p, 811p, and 820p are portable projectors that weigh less than 10 pounds and offer up to 2500 ANSI lumens of brightness. From classrooms to auditoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting. Images are displayed at a resolution of 1024 × 768 pixels (PowerLite 811p and 820p) or 800 × 600 pixels (PowerLite 600p). The 0.
600-811-820.book Page 2 Tuesday, April 30, 2002 10:17 AM Getting the Most from Your Projector note You can connect a maximum of four sources at the same time. Your EPSON PowerLite projector is a highly versatile presentation tool. You can connect it to one or two computer sources and up to three video sources and easily switch between them. You can also include sound for up to three of the sources.
600-811-820.book Page 3 Tuesday, April 30, 2002 10:17 AM If you’re permanently installing the projector, you may wish to connect external speakers or a public address system to the projector’s Audio Out port; see page 83. ■ Controlling the Projector from a Computer If you want to be able to control the projector’s settings from a computer (for example, if the projector is ceiling-mounted), you can install the EMP Link program.
600-811-820.book Page 4 Tuesday, April 30, 2002 10:17 AM ■ Owner’s Kit Includes your Quick Setup sheet, warranty brochures, and EPSON PrivateLine® Support card. Store this User’s Guide in the folder and keep the folder with your projector at all times. ■ Built-in help system Provides assistance for common problems. Available from the Help button on the projector or the remote control. See page 70 for details. ■ support.epson.com Download FAQs and e-mail your questions to EPSON support.
600-811-820.book Page 5 Tuesday, April 30, 2002 10:17 AM Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: remote control power cord projector batteries computer cable A/V cable USB cable PS/2 mouse cable Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location.
600-811-820.book Page 6 Tuesday, April 30, 2002 10:17 AM Additional Components Depending on how you plan to use the projector, you may need additional components: 6 Welcome ■ To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) ■ To receive a component video signal from a VCR or other video device, you need a VGA-to-component video cable. You can purchase this from EPSON; see page 7.
600-811-820.book Page 7 Tuesday, April 30, 2002 10:17 AM Optional Accessories To enhance your use of the projector, EPSON provides the following optional accessories. You can purchase these accessories from your dealer, by calling EPSON at (800) 873-7766, or by visiting the EPSON StoreSM at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.
600-811-820.
600-811-820.book Page 9 Tuesday, April 30, 2002 10:17 AM 1 1 Setting Up the Projector T his chapter tells you how to set up the projector for a laptop computer or video presentation. If you need to set up the projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.
600-811-820.book Page 10 Tuesday, April 30, 2002 10:17 AM Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ■ Place the projector on a sturdy, level surface, approximately 2.85 to 41 feet from the screen. ■ Make sure there is plenty of space for ventilation around and under the projector.
600-811-820.book Page 11 Tuesday, April 30, 2002 10:17 AM If you place the projector below the level of the screen, you’ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the distortion by pressing the Keystone button as described in the next chapter. note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector’s left side.
600-811-820.book Page 12 Tuesday, April 30, 2002 10:17 AM Connecting to a Laptop Computer note To connect to desktops and other computer systems, see Appendix A. If you have an iBook with an RCA video-out port, follow the instructions for connecting to a video device on page 16. You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices.
600-811-820.book Page 13 Tuesday, April 30, 2002 10:17 AM Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 41). This gives you more flexibility in delivering your presentation, since you won’t need to stand near your computer. The USB cable also provides audio support.
600-811-820.book Page 14 Tuesday, April 30, 2002 10:17 AM Amplifying Computer Audio note If you connected the USB cable, you may not need a separate audio cable to amplify audio from your computer. Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need more volume or better sound quality, you can connect a stereo, mini-jack audio cable (not included). 1. Connect one end of the audio cable to the Audio1 jack on the projector.
600-811-820.book Page 15 Tuesday, April 30, 2002 10:17 AM Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically detects the video format. The projector can receive composite video, S-Video, and component video. You can connect one or more of these video sources at the same time.
600-811-820.book Page 16 Tuesday, April 30, 2002 10:17 AM Connecting the RCA A/V Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of the A/V cable to the projector’s yellow Video jack. 2. Connect the other yellow plug to the video-out jack on your video source. 3. Connect the red and white plugs on the A/V cable to the projector’s Audio L (white) and R (red) jacks. 4.
600-811-820.book Page 17 Tuesday, April 30, 2002 10:17 AM Connecting an S-Video Cable If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you’ll need an S-Video cable, which may be included with your video source, or can be purchased separately. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of an S-Video cable into the projector’s S-Video connector. 2.
600-811-820.book Page 18 Tuesday, April 30, 2002 10:17 AM Connecting a Component Video Cable If your video source has component (blue, green, and red) connectors, you can use them to project a higher quality video image. However, you’ll need a VGA-to-component video cable, which is available from EPSON; see page 7. Before starting, make sure the projector and your DVD player or other video device are turned off. 1. Connect the VGA end of the cable to the projector’s Computer 2/Component Video port. 2.
600-811-820.book Page 19 Tuesday, April 30, 2002 10:17 AM 2 2 Using the Projector Once you’ve connected the projector to your computer or other equipment (as described in Chapter 1 or Appendix A), you’re ready to turn on the projector, adjust the image, and give your presentation. Although you can operate the projector without it, the remote control lets you use additional features. See Chapter 3 for instructions on using the remote.
600-811-820.book Page 20 Tuesday, April 30, 2002 10:17 AM Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer and video equipment in any order, but if you have more than one computer or video source connected, you may have to switch to the desired source as described on page 29.
600-811-820.book Page 21 Tuesday, April 30, 2002 10:17 AM 5. Press the red Power button on top of the projector. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the No Signal message displayed. This is normal. power light warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. Power button 6.
600-811-820.book Page 22 Tuesday, April 30, 2002 10:17 AM What To Do If You See a Blank Screen If you see a blank screen or a blue screen with the No Signal message after turning on your computer or video source, try the following: ■ Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems). ■ Make sure the power light is green and not flashing and the lens cover is off. ■ Try restarting your computer.
600-811-820.book Page 23 Tuesday, April 30, 2002 10:17 AM If you’re using a PowerBook or iBook with OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors and Sound. 2. Click the Arrange icon. click here drag one monitor icon on top of the other 3. Drag one monitor icon on top of the other.
600-811-820.book Page 24 Tuesday, April 30, 2002 10:17 AM If you're using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select System Preferences, then select Displays. 2. Make sure the VGA Display dialog box is selected. 3. Click the Arrange tab. Select the VGA Display dialog box Make sure Mirror Displays is checked 4. Make sure the Mirror Displays checkbox is selected.
600-811-820.book Page 25 Tuesday, April 30, 2002 10:17 AM Focusing and Zooming Your Image Rotate the focus ring to sharpen the image. focus ring Rotate the zoom ring to reduce or enlarge the image. zoom ring If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoom button on the remote control to zoom in on a portion of the image. See page 37 for instructions.
600-811-820.book Page 26 Tuesday, April 30, 2002 10:17 AM Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector’s foot. 1. Stand behind the projector. Press the foot release button and lift the front of the projector. This unlocks the foot. back adjustable foot foot release button 2. Once the image is positioned where you want it, release the button to lock the foot in position. 3.
600-811-820.book Page 27 Tuesday, April 30, 2002 10:17 AM Adjusting the Image Shape If the projected image isn’t square or has a “keystone” shape, do one or more of the following: ■ If your image looks like or , you’ve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely.
600-811-820.book Page 28 Tuesday, April 30, 2002 10:17 AM Resizing the Image Some computer images need to be resized to display in the projector’s native resolution. If only part of your computer image is displayed, you can correct it with the Resize button. Resize button ■ Press the Resize button on the projector’s control panel (or on the remote control). The screen image is automatically compressed. ■ Continue pressing the Resize button to pan around the screen in the original resolution.
600-811-820.book Page 29 Tuesday, April 30, 2002 10:17 AM Controlling the Projector While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, plus many others, using the remote control as described in Chapter 3.
600-811-820.book Page 30 Tuesday, April 30, 2002 10:17 AM Turning Off the Picture and Sound note You can also have an image, such as a company logo, display on the screen whenever you press the A/V Mute button. See page 53 for instructions. You can use the A/V Mute button on the control panel to darken your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen.
600-811-820.book Page 31 Tuesday, April 30, 2002 10:17 AM 3. Press the Power button again. The power light flashes orange for about a minute and a half as the projector cools down. When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the Power button. 4. If you extended the front foot, press the foot adjust button to retract it. 5.
600-811-820.
600-811-820.book Page 33 Tuesday, April 30, 2002 10:17 AM 3 3 Using the Remote Control The remote control lets you access your projector’s features from anywhere in the room—up to 30 feet away. You can use it to turn the projector on and off, zoom in on a portion of your image, and highlight your presentation. If you’re using a computer and you’ve connected the mouse cable (as described in Chapter 1 or Appendix A), you can use the remote control as a wireless mouse.
600-811-820.book Page 34 Tuesday, April 30, 2002 10:17 AM Turning On and Using the Remote Control caution When replacing batteries, take the following precautions: Don’t mix old and new batteries. ■ Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. ■ Before using the remote control, you need to install its batteries and turn it on as described below.
600-811-820.book Page 35 Tuesday, April 30, 2002 10:17 AM Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or back of the projector or at the screen (the projector’s front sensor can detect signals bounced off the screen). ■ Press the button for the function you want to use. See the following pages for instructions. ■ For some functions, you need to use the button like a mouse to navigate on the screen.
600-811-820.book Page 36 Tuesday, April 30, 2002 10:17 AM Adjusting the Volume If you’ve connected an audio source to the projector, you can adjust the sound that’s output through the projector’s speakers. ■ To increase the volume, press on the right side of the Volume button. ■ To reduce the volume, press on the left side of the Volume button.
600-811-820.book Page 37 Tuesday, April 30, 2002 10:17 AM Zooming Your Image You can zoom in on a portion of the image using the E-Zoom button on the remote control. 1. Press the E-Zoom button. Power A/V Mute Freeze E-Zoom A crosshair indicating the center of the zoom-in area appears on the screen. 2. Use the button to move the crosshair where you want it. 3. Press the right side of the E-Zoom button to enlarge the selected area.
600-811-820.book Page 38 Tuesday, April 30, 2002 10:17 AM Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. If you’re using component video, you can display a second video (from a composite or S-Video source) in the window. First make sure you have connected your VCR or other video sources as described in Chapter 1.
600-811-820.book Page 39 Tuesday, April 30, 2002 10:17 AM Highlighting Your Presentation You can highlight areas on the screen using the numbered buttons on the remote control. You can use these “special effects” features to annotate your presentation slides or call attention to your most important points.
600-811-820.book Page 40 Tuesday, April 30, 2002 10:17 AM Spotlighting Your Image With the Spotlight tool, you can highlight part of the screen. 1. To activate the spotlight tool, press button 2 on the remote control. A square spotlight appears on the image. You can continue pressing button 2 to switch between three spotlight sizes. 2. Use the button to move the spotlight where you want it. 3. To remove the spotlight, press Esc.
600-811-820.book Page 41 Tuesday, April 30, 2002 10:17 AM Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 30 feet away. This gives you more flexibility, since you won’t need to stand near your computer to change slides, for example.
600-811-820.book Page 42 Tuesday, April 30, 2002 10:17 AM ■ To double-click, press down twice on the left mouse button. ■ To click and drag, press down on the left mouse button and then tilt the button in the direction you want to drag. Power A/V Mute Freeze Previous E-Zoom Next 42 You can use the up and down arrow buttons on the remote control to move the cursor or move through a PowerPoint presentation. This works only when you use the USB mouse cable.
600-811-820.book Page 43 Tuesday, April 30, 2002 10:17 AM 4 4 Fine-tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use.
600-811-820.book Page 44 Tuesday, April 30, 2002 10:17 AM Using the Projector’s Menu System The eight projector menus let you adjust and customize the projector features from either the control panel or remote control: 44 ■ The Video menu controls the look and quality of the projected image. It lets you adjust the image position and fine-tune settings such as Brightness, Sharpness, and Contrast. ■ The Audio menu controls the volume level, treble, and bass settings.
600-811-820.book Page 45 Tuesday, April 30, 2002 10:17 AM Changing Menu Settings You can use the buttons on the control panel or remote control to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the control panel or the remote control.
600-811-820.book Page 46 Tuesday, April 30, 2002 10:17 AM 4. Use the Sync+ or Sync– button (control panel) or the button (remote control) to scroll through the list of options. (If a computer or video source isn’t connected, certain options may be unavailable.) Tracking– or Tracking+ button (control panel) or 5. Use the the button (remote control) to change the setting for the selected option.
600-811-820.book Page 47 Tuesday, April 30, 2002 10:17 AM Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video (analog RGB), DVI computer video (digital RGB), composite or S-Video, component video, or RGB video (standard TV).
600-811-820.book Page 48 Tuesday, April 30, 2002 10:17 AM Repositioning the Image note Follow these steps to move the image to a different position: If you have repositioned the image or adjusted the sync setting, you can use the button on the control panel or the Auto button on the remote control to restore the default settings. 1. Press the Menu button. You see the menu screen. 2. Press the button to select the Video menu. 3. Press to select the Position option. You see a positioning screen. 4.
600-811-820.book Page 49 Tuesday, April 30, 2002 10:17 AM ■ Tint (NTSC video only) Adjusts the balance of green to magenta in the image. ■ Sharpness Adjusts the sharpness of the image. ■ Color Mode Corrects the vividness of image color.
600-811-820.book Page 50 Tuesday, April 30, 2002 10:17 AM Saving and Recalling Computer Settings When you are projecting from an analog computer source, you can save and recall settings (resolution, tracking, sync signal, and position) in up to five different combinations. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the projector’s current settings: 1.
600-811-820.book Page 51 Tuesday, April 30, 2002 10:17 AM Adjusting the Sound You can use the Audio menu to select the audio source or adjust the sound volume or treble/bass balance. 1. Press the Menu button. You see the menu screen. Sync– button (control panel) or the button 2. Use the (remote control) to highlight Audio. You see the following: 3. Press to select the Audio menu. 4.
600-811-820.book Page 52 Tuesday, April 30, 2002 10:17 AM Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 39 to 41. You can use the Effect menu to customize these tools and set the pointer speed for highlighting. The Reset option lets you return all the highlighting tools to their default settings. 1. Press the Menu button. You see the main menu. 2.
600-811-820.book Page 53 Tuesday, April 30, 2002 10:17 AM Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. Capturing the Image Start by displaying the image you want to use.
0-811-820.book Page 54 Tuesday, April 30, 2002 10:17 AM 5. When you see the message “Do you use this image?” select Yes and press . You see the screen shown at the left. 6. Use the Tracking and Sync buttons (control panel) or the button (remote control) to select a zoom rate (display size), and then press . 7. When the message “Do you save the user’s logo?” appears, select Yes and press . Saving the logo may take a few moments. Do not use your projector or video source (computer, DVD player, etc.
600-811-820.book Page 55 Tuesday, April 30, 2002 10:17 AM Customizing Projector Features You can use the Setting menu to disable the projector’s sleep mode, adjust the image shape, and customize several other features. 1. Press the Menu button. Sync– button (control panel) or the button 2. Use the (remote control) to highlight Setting. You see the options and their settings on the right side: 3. Press to select the Setting menu. 4.
600-811-820.book Page 56 Tuesday, April 30, 2002 10:17 AM ■ Prompt Turns off the identifying text that appears briefly when you switch picture sources. (It’s best to leave this on.) ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button. The logo setting displays an image that you have transferred to the projector (see page 53). ■ Comp1 Input Specifies the format for input to the Computer1 port. Select Digital-RGB/Analog-RGB, Analog-RGB, or RGB-Video.
600-811-820.book Page 57 Tuesday, April 30, 2002 10:17 AM Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the Menu button. Sync– button (control panel) or the button 2. Use the (remote control) to highlight Advanced. You see the features and their settings on the right side: 3. Press to select the Advanced menu. 4.
600-811-820.book Page 58 Tuesday, April 30, 2002 10:17 AM ■ Ceiling Turn on when the projector is mounted upside-down from the ceiling. ■ COM Port Switches between serial (RS-232C) and USB communication for programming/projector control. 5. When you’re finished, press Esc or Menu. Viewing Lamp Usage and Other Information Use the About menu to view information about the display settings of your computer and the number of hours the lamp has been used.
600-811-820.book Page 59 Tuesday, April 30, 2002 10:17 AM 3. If you have changed the lamp, press to select Reset Lamp Timer. Press again, then select Yes when you see the prompt. Press to confirm the reset. 4. When you’re finished, press Esc or Menu. Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values. Select Reset All and press the button on the control panel or remote control to display the confirmation screen.
600-811-820.
600-811-820.book Page 61 Tuesday, April 30, 2002 10:17 AM 5 5 Maintaining and Transporting the Projector Y our projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers.
600-811-820.book Page 62 Tuesday, April 30, 2002 10:17 AM Cleaning the Lens Clean the lenses whenever you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lenses, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface. Remove the cap before cleaning Cleaning the Projector Case Before you clean the case, first turn off the projector and unplug the power cord.
600-811-820.book Page 63 Tuesday, April 30, 2002 10:17 AM Cleaning and Replacing the Air Filter Clean the air filter on the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps: 1. Turn off the projector, allow it to cool down, and unplug the power cord. 2.
600-811-820.book Page 64 Tuesday, April 30, 2002 10:17 AM 4. If you need to replace the filter, press the arrow tab and lift up the filter to remove it. Press the arrow tab 5. To install a new filter, first insert the tabs, then press down until it clicks in place. warning Be extremely careful when removing the lamp module. In the unlikely event that the bulb has ruptured, small glass fragments may be present and should be removed with caution.
600-811-820.book Page 65 Tuesday, April 30, 2002 10:17 AM Follow these steps to replace the lamp: 1. Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord. 2. Allow the projector to cool for at least half an hour (if it has been on). warning Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 3. Use a screwdriver to slide the latch and pop open the lamp cover. Then lift up and remove it. 4.
600-811-820.book Page 66 Tuesday, April 30, 2002 10:17 AM 5. Grasp the lamp as shown and pull it straight out. caution Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 6. Gently insert the new lamp. 7. Once the lamp is fully inserted, tighten its screws. 8. To replace the lamp cover, insert the tabs and then snap the cover into place. (The projector won’t come on if the lamp cover is loose.
600-811-820.book Page 67 Tuesday, April 30, 2002 10:17 AM Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu. 1. Press the Menu button on the control panel or the remote control. You see the main menu. 2. Use the Sync– button (control panel) or the control) to highlight About. button (remote You see the lamp usage hours and other settings. 3. Press to select Reset Lamp Timer. Press prompt: 4. Select Yes, then press again. You see this . 5.
600-811-820.book Page 68 Tuesday, April 30, 2002 10:17 AM Transporting the Projector note EPSON shall not be liable for any damages incurred during transportation. The projector contains many glass and precision parts. If you need to transport it, follow these packing guidelines to prevent damage to the projector: ■ When shipping the projector for repairs, use the original packaging material if possible.
600-811-820.book Page 69 Tuesday, April 30, 2002 10:17 AM 6 6 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
600-811-820.book Page 70 Tuesday, April 30, 2002 10:17 AM Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Help for the image ■ Help for the sound ■ Language selection (Language) Follow these steps to get help: 1. Press the blue ? Help button on the projector or the remote control.
600-811-820.book Page 71 Tuesday, April 30, 2002 10:17 AM 4. Highlight a solution (if this choice is available). Then press the button to select the solution. Press the Esc button if you need to back up. If the solution is to adjust one of the settings, press either Tracking– or Tracking+ button on the projector (or the use the button on the remote control) to adjust it. 5. To exit the Help system, press the blue ? Help button.
600-811-820.book Page 72 Tuesday, April 30, 2002 10:17 AM Refer to the following table for a complete description of the projector’s status lights and their meaning: Status lights Light Status Description orange The projector is in sleep mode. You can unplug it or press the Power button to turn it on. flashing green The projector is warming up. Wait for the image to appear. green The projector is operating normally. flashing orange The projector is cooling down.
600-811-820.book Page 73 Tuesday, April 30, 2002 10:17 AM The power light is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector. The power light does not come on. Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened.
600-811-820.book Page 74 Tuesday, April 30, 2002 10:17 AM You see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described in Chapter 1. ■ Try restarting your computer. ■ If you’ve connected a computer and one or more video sources, you may need to press the Computer/YCbCr or Video button (on the projector) or the Comp1, Comp2/YCbCr, Video, or S-Video button (on the remote control) to select the correct source.
600-811-820.book Page 75 Tuesday, April 30, 2002 10:17 AM If you’re using Macintosh OS X: 1. Select System Preferences. 2. Select Displays. 3. Make sure the VGA Display dialog box is selected. 4. Click the Arrange tab. 5. Make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the Comp1 Input and Comp2/ YCbCr options in the Setting menu are correct. See page 56.
600-811-820.book Page 76 Tuesday, April 30, 2002 10:17 AM ■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. The image isn’t square, but trapezoid-shaped. ■ If you’ve tilted the projector upward by extending the legs, the image will be broader at the top. Hold down the or button on top of the projector until the image is square.
600-811-820.book Page 77 Tuesday, April 30, 2002 10:17 AM ■ Adjust the Sharpness setting on the Video menu (see page 48). When you change video settings, you should be able to see the effect on the screen immediately. If you’re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section. If you don’t like the new settings, you can always select Reset to return to the factory default settings.
600-811-820.book Page 78 Tuesday, April 30, 2002 10:17 AM 3. Hold down the Shift button and press the Sync– and Sync+ buttons to increase the sharpness of the image. Sync+ Tracking - Auto Tracking + Keystone Shift Sync- R i The colors of the image are not right. note Because of the different technologies used, your projected image may not exactly match the colors on your laptop or computer monitor.
600-811-820.book Page 79 Tuesday, April 30, 2002 10:17 AM ■ Make sure the Windows volume controls on your computer are not turned all the way down or set to Mute. You may be able to check this by clicking the volume control in your Windows System Tray (lower right corner of the screen). ■ Make sure the A/V Mute button is not enabled. ■ The wrong source may be selected.
600-811-820.book Page 80 Tuesday, April 30, 2002 10:17 AM Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach EPSON’s product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.
600-811-820.book Page 81 Tuesday, April 30, 2002 10:17 AM A A Appendix A: Connecting to Additional Equipment T his appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source. It also provides guidance on setting up the projector in a permanent installation.
600-811-820.book Page 82 Tuesday, April 30, 2002 10:17 AM Installing the Projector The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: front projection rear projection ceiling mounting rear/ceiling projection To project from overhead, you’ll need to select Ceiling in the projector’s Advanced menu. To project from the rear, select Rear Proj.
600-811-820.book Page 83 Tuesday, April 30, 2002 10:17 AM Controlling the Projector from a Computer If you want to be able to control the projector’s settings from a computer, you can install the EMP Link program. You can download this program, plus its User’s Guide, from EPSON’s web site at support.epson.com. You’ll also need a serial or USB cable to connect the projector to the computer. Connecting to an External Audio System The projector’s internal speakers are loud enough for most rooms.
600-811-820.book Page 84 Tuesday, April 30, 2002 10:17 AM Connecting to a PC Desktop Computer You can connect the projector to any IBM-compatible PC. This section includes instructions for the following: ■ Connecting the computer cable ■ Connecting the mouse cable (if you want to use the remote control as a mouse or use USB audio) ■ Connecting the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect.
600-811-820.book Page 85 Tuesday, April 30, 2002 10:17 AM 3. Connect one end of the computer cable to the projector’s Computer2/Component Video port, as shown. Computer2/Component Video Port 4. Connect the other end of the cable to the computer’s video port. 5. Tighten the screws on the connectors.
600-811-820.book Page 86 Tuesday, April 30, 2002 10:17 AM Connecting the Mouse Cable note If you have a PC with a serial mouse port, you’ll need a serial mouse cable. See your projector dealer to obtain the correct cable. To use the remote control as a mouse, follow the steps below. You’ll use a different mouse cable, depending on whether your computer has a round PS/2 mouse port or a flat USB port. The USB cable also provides audio support.
600-811-820.book Page 87 Tuesday, April 30, 2002 10:17 AM Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable. 1. Connect one end of the audio cable to the Audio 1 jack on the projector. Audio 1 jack audio cable 2.
600-811-820.book Page 88 Tuesday, April 30, 2002 10:17 AM Connecting to a Desktop Macintosh note Macintosh configurations vary. See your computer manual for the location of the ports needed to connect your projector. Older models may require a Macintosh adapter set, which you may purchase from EPSON; see page 7. You can connect the projector to any desktop Macintosh.
600-811-820.book Page 89 Tuesday, April 30, 2002 10:17 AM 3. Connect one end of the computer cable to the projector’s Computer 2/ Component Video port, as shown. Computer2/Component Video port Macintosh desktop adapter (if needed) 4. Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 7).
600-811-820.book Page 90 Tuesday, April 30, 2002 10:17 AM Connecting the Mouse Cable To use the remote control as a mouse follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector. If it has a round mouse port, you’ll need a Macintosh mouse cable; see your projector dealer for help in obtaining the correct cable. The USB cable also provides audio support on Mac OS 9.0 and 9.1.
600-811-820.book Page 91 Tuesday, April 30, 2002 10:17 AM Connecting the Audio Cable If your presentation includes sound and you want to use the projector’s built-in speakers, you’ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable. 1. Connect one end of the audio cable to the Audio 1 jack on the projector. Audio1 jack audio cable 2.
600-811-820.book Page 92 Tuesday, April 30, 2002 10:17 AM Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector’s Computer1 port. You’ll need the optional DVI-analog cable, unless the computer supports DVI (Digital Visual Interface) video. 1. Connect one end of the cable to the computer’s video port. 2. Connect the other end to the projector’s Computer1 port as shown. Computer 1 port 3.
600-811-820.book Page 93 Tuesday, April 30, 2002 10:17 AM Connecting to a High-End Workstation There is no across-the-board standard for workstation video output. However, your PowerLite projector is capable of remapping input resolutions up to 1600 × 1200 pixels. Workstations that follow the SXGA standard and use the HD15 (standard VGA) connector won’t need an adapter cable or any special connection device. If your system varies, contact your computer dealer for help in connecting your workstation.
600-811-820.
600-811-820.book Page 95 Tuesday, April 30, 2002 10:17 AM B B Appendix B: Notices T his chapter includes safety instructions and other important information about your EPSON PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector.
600-811-820.book Page 96 Tuesday, April 30, 2002 10:17 AM 96 Appendix B: Notices ■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.
600-811-820.book Page 97 Tuesday, April 30, 2002 10:17 AM Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector. ■ Ambient light is too bright. ■ Certain types of fluorescent lighting are used.
600-811-820.book Page 98 Tuesday, April 30, 2002 10:17 AM Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: EPSON AMERICA, INC. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
600-811-820.book Page 99 Tuesday, April 30, 2002 10:17 AM FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
600-811-820.book Page 100 Tuesday, April 30, 2002 10:17 AM Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc.
600-811-820.book Page 101 Tuesday, April 30, 2002 10:17 AM FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.
600-811-820.
600-811-820.book Page 103 Tuesday, April 30, 2002 10:17 AM C C Appendix C: Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 0.9 inches (22.9 mm) Lens F=1.74 to 2.06, f=28.3 mm to 37.98 mm Resolution (native format) 811p and 820p: 1024 × 768 pixels (XGA) 600p: 800 × 600 pixels (SVGA) Color reproduction 24 bit, 16.
600-811-820.book Page 104 Tuesday, April 30, 2002 10:17 AM Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 200 W Lamp life About 1500 hours Part number V13H010L15 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2 and USB Dimensions Height 4.1 inches (104 mm) Width 13.7 inches (348 mm) Depth 10.8 inches (274 mm) Weight 9.3 lb (4.2 kg) Electrical 104 Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 3.
600-811-820.book Page 105 Tuesday, April 30, 2002 10:17 AM Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (-10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Safety United States FCC Part 15J Class B UL1950 Rev. 3 Canada DOC SOR/88-475 CSA C22.2 No. 950 Rev.
600-811-820.book Page 106 Tuesday, April 30, 2002 10:17 AM Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below. To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector; see the following table for compatible formats.
600-811-820.book Page 107 Tuesday, April 30, 2002 10:17 AM Mode SXGA3—75 SXGA3—85 SXGA+60 SXGA+75 SXGA+85 UXGA48i UXGA60 UXGA65 UXGA70 UXGA75 UXGA80 UXGA85 iMAC VGA iMAC SVGA iMAC XGA MAC II 13 MAC16 MAC19 MAC21 TV525i TV625i SDTV480p HDTV720p HDTV1080i NTSC NTSC4.
600-811-820.book Page 108 Tuesday, April 30, 2002 10:17 AM ESC/VP21 Commands When the projector is in a command ready state, it returns the : code. When command processing is complete, the projector also returns a : code. If command processing terminates with an error, an error message is output and then the : code is sent.
600-811-820.
600-811-820.
600-811-820.
600-811-820.
600-811-820.
