User`s guide

6 Welcome
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
■ To receive a component video signal from a VCR or other video
device, you need a D-sub 15-pin to component video cable
(available from EPSON; see page 7).
■ To amplify your computer’s audio through the projector’s sound
system, you need a computer audio cable (male-to-male 3.5-mm
stereo miniplug cable). See your computer or electronics dealer to
obtain this cable.
■ Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 79 (available from
EPSON; see page 7). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
720-730.book Page 6 Thursday, October 30, 2003 11:32 AM