User`s guide

Using the Projector 27

Adjusting the Image Shape

If the projected image isn’t rectangular or has a “keystone” shape, do

one or more of the following:

■ If your image looks like or , you’ve placed the

projector off to one side of the screen, at an angle. Move it directly

in front of the center of the screen, facing the screen squarely.

■ If your image looks like or , the Auto Keystone feature

has been disabled. You can correct this by turning on the Auto

Keystone feature or by manually adjusting the keystone correction

value. Follow the directions below:

■ To turn on Auto Keystone, press the Menu button on the

remote control. Use the directional buttons to select the

Setting menu, then press Enter. Use the directional buttons

to highlight

Auto Keystone and to turn the feature on. Press

the

Enter button to save your changes, then exit the menu by

pressing the

Menu button.

■ To manually adjust the keystone correction value, press the

or side of the

Keystone button on the projector to

correct the shape of the image. After correction, your image

will be slightly smaller.

You can also perform electronic keystone correction using the

projector’s Setting menu. See page 45.

A/V Mute

E-Zoom

Freeze

S-Video/Video

Color Mode

Computer

Page upPage down

Power

ESCAuto

Enter

Enter directional buttons

720-730.book Page 27 Thursday, October 30, 2003 11:32 AM