User`s guide

28 Using the Projector

Shutting Down the Projector

When you’ve finished using the projector, follow the recommended

procedure to shut it down. This extends the life of the lamp and

protects the projector from possible overheating.

1. If you’re using a computer, shut it down first.

2. To turn off the projector, press the

Power button on the

projector or remote control. You see a confirmation message. (If

you don’t want to turn it off, press any other button.)

3. Press the

Power button again. The power light flashes orange for

about forty five seconds as the projector cools down. When the

projector has cooled, the orange light stays on and the exhaust fan

shuts off.

If you want to turn the projector on again, wait until the orange

light stops flashing. Then press the

Power button.

4. Retract the front feet as shown.

note

When the projector has not

received any input signals for

0 minutes, it automatically

turns off the projector lamp

and enters “sleep mode.” This

conserves electricity, cools the

rojector, and extends the life

of the lamp. If you are done

using the projector, unplug

the power cord. If you want

to start projecting again, press

the Power button.

A/V Mute

E-Zoom

Freeze

Color Mode

S-Video/Video

Computer

Page upPage down

Power

caution

To avoid damaging the

projector or lamp, never

unplug the power cord

when the power light is

green or flashing orange.

720-730.book Page 28 Thursday, October 30, 2003 11:32 AM