User`s guide

56 Maintaining and Transporting the Projector
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the
LAMP REPLACE warning message. Follow the directions below to
reset the lamp timer:
1. Press the
Menu button. You see the main menu.
2. Use the directional buttons to highlight
About. You see the
following:
3. Press
Enter to select the About menu.
4. Press
Enter to select the Reset Lamp Timer option. You see the
following:
5. Use the directional buttons to select
Yes and press Enter.
6. Press
Esc to return to the main menu.
7. Press
Esc again (or the Menu button) to exit the menu system.
: Select : Enter
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Frequency
Video Source
V ---.--Hz
Reset Lamp Timer
H ---.--kHz
Lamp 0H
SYNC Mode
SYNC Polarity
------
V ------
H ------
Resolution
Refresh Rate 0.0 Hz
0x 0
Computer
Input Signal
:
:
:
:
:
:
:
: Analog-RGB
Execute
Reset Lamp Timer
Execute?
YES
NO
720-730.book Page 56 Thursday, October 30, 2003 11:32 AM