User`s guide

76 Appendix A: Connecting to Additional Equipment
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below.
1. Connect the square end of the USB mouse cable to the projector’s
USB port, as shown.
2. Disconnect your mouse from the port on the back of your
computer and replace it with the other end of the cable. (Your
computer’s mouse will be disabled while you are using the remote
as a mouse.)
3. If necessary, configure your computer to work with a USB mouse.
720-730.book Page 76 Thursday, October 30, 2003 11:32 AM