User`s guide

Managing Projectors 133
If you’re connected over an 802.11g wireless network, start
NS Connection (see page 74) and connect to the projector you
want to monitor. Then click on the control bar that appears
on the screen. The projector’s web screen opens in the browser
window.
4. Select one of the menu options listed on the left, then change any
settings as needed in the main part of the screen. These settings
correspond to those found in the projector’s menu system; for
details, see page 108.
5. Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons: choose a source, stop the
action, control the volume, size the image, turn off the picture
and sound, or turn the projector’s power on or off.
For details about the remote control, see page 30.
Menus
Functions corresponding to remote control buttons
Canada User's Guide.book Page 133 Friday, September 3, 2004 3:49 PM