User`s guide

143
1
Maintaining the Projector
Your projector needs little maintenance. All you have to do is keep
the lens clean and periodically clean the air filters at the side and
bottom of the projector. A clogged air filter can block ventilation
needed to cool the projector.
The only parts you should replace are the lamp and air filter. If any
other part needs replacing, contact your dealer or a qualified servicer.
This chapter covers the following:
■ Cleaning the lens
■ Cleaning the projector case
■ Cleaning the air filters and vents
■ Replacing the lamp and air filter
■ Transporting the projector
warning
Before you clean any part of
the projector, turn it off and
unplug the power cord.
Never open any cover on the
projector, except the lamp
cover. Dangerous electrical
voltages in the projector can
injure you severely. Do not
try to service this product
yourself, except as specifically
explained in this User’s
Guide. Refer all other
servicing to qualified service
personnel.
Canada User's Guide.book Page 143 Friday, September 3, 2004 3:49 PM