User`s guide

Presenting Through a Wireless Network 59
Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Switch the projector to EasyMP and insert the Epson 802.11G/B
card (see page 50). You see this screen:
2. To select
Config, press the Enter button on the remote control.
3. Highlight
Basic under Wireless LAN and press Enter.
You see the following screen:
Access point
mode
Canada User's Guide.book Page 59 Friday, September 3, 2004 3:49 PM