Owner manual

114 Presenting from a Memory Card or Digital Camera
Removing the Card
When you’re done using the projector and want to remove the
memory card, follow these steps. Make sure a scenario is not playing
and the card is not in use (the indicator light above the card slot is off)
before removing it.
1. Press the eject button above the card slot.
The button pops out.
2. Press the button again. The memory card is released, and you can
remove it from the slot in the projector.
3. To remove the card from the
adapter, pull it out as shown:
note
If you are using CardPlayer,
highlight the
EJECT button
and press
Enter on the
remote control. Then wait
for the indicator light to go
off before you eject the card.
Make sure the indicator light is off
Press the eject button