Owner manual

Presenting from a Memory Card or Digital Camera 121
5. Select Open Folder on the drop-down menu. When the folder
opens, you see another folder with your manufacturer’s name.
6. Position the cursor on the folder and press
Enter. Then select
Open Folder.
You see your image files when the folder opens.
7. Position the cursor on the image file you want to project and press
Enter. Then select View Image.
The image is projected on the screen. If you want, you can press
different sides of the button to rotate the image while you’re
viewing it.
To end projection, press the
ESC button on the remote control, then
select
Exit and press Enter.
note
Make sure your camera
shows up on your desktop as
a drive letter. If it does, it is
probably a USB mounted
device and will work with
the projector software. The
EasyMP software does not
support TWAIN-compliant
digital caneras.
If your camera’s memory
card is supported by the
projector, you can insert it
into the projector’s card slot
and project your images (see
“Creating a Slideshow on the
Fly” on page 118). You can’t
have your camera connected
at the same time.